Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
1.
Braz. J. Pharm. Sci. (Online) ; 57: e19094, 2021. tab, graf
Artigo em Inglês | LILACS | ID: biblio-1345458

RESUMO

Bisphenol A (BPA), an endocrine disrupter, can migrate from packaging material into food stuff. This research was designed to measure BPA levels in makdous, a traditional Syrian food. Forty three samples of makdous stored in different plastic containers (polyethylene (PE), polypropylene (PP), and unspecified plastic containers) were analyzed every 3 months for one year beginning July 2017. Quantification of BPA was carried out by an RP-HPLC system equipped with fluorescence detector after solid phase extraction. Migration was found in PE and PP plastic containers with slight differences. Statistically significant differences in BPA levels were observed between samples assayed after two weeks of preparation and samples assayed after 12 months (mean 16.32 vs. 38.26 µg/kg, p value=0.003). According to these amounts, BPA levels were all under the specific migration limit of 0.05 mg/kg as newly referred in Regulation (EU) No 2018/213. These levels of exposure would only contribute to 2.15% and 2.75% of the EFSA t-TDI in both men and women respectively based on mean dietary exposure estimates derived from a 24-h dietary information study from 875 participants. Hence there are no concerns about potential health risks from makdous consumption


Assuntos
Humanos , Masculino , Feminino , Cromatografia Líquida de Alta Pressão/métodos , Disruptores Endócrinos/classificação , Extração em Fase Sólida/instrumentação , Alimentos/classificação , Plásticos/efeitos adversos , Polipropilenos , Pesos e Medidas , Embalagem de Produtos/classificação , Risco à Saúde Humana , Exposição Dietética/efeitos adversos
2.
Rev. bras. plantas med ; 18(1,supl.1): 248-255, 2016. tab, graf
Artigo em Inglês | LILACS | ID: lil-782986

RESUMO

ABSTRACT The purpose of this study was to assess the effects of hydrocooling and polyethylene terephthalate (PET) perforated and non-perforated packaging on post-harvest quality of peppermint (Mentha piperita L.) leaves stored at 5 and 25ºC. The experiments were conducted using a subdivided parcel layout in a completely randomized design with four replicates. Each parcel used a 2x3 layout (two hydrocooling treatments and three packaging treatments) with subparcels for storage time. The shelf life, chlorophyll content, mass loss (ML), relative water content (RWC), total soluble sugars (TSS), reducing sugars (Red), non-reducing sugars (NRed) and starch of the leaves were determined. Cold storage increased the shelf life of the peppermint by up to 64 times (>15 days). Hydrocooling increased the RWC of the leaves. Plastic packaging was effective in maintaining the RWC. Unperforated packages more effectively prevented ML in the peppermint leaves and prevented the leaves from wilting for a longer period of time. The chlorophyll content of the leaves varied according to the treatment. The soluble sugars and starch levels varied according to RWC. Hydrocooling with the use of non-perforated plastic packages was the most effective method for maintaining the postharvest quality of the peppermint.


RESUMO O trabalho objetivou avaliar os efeitos do hidroresfriamento e da embalagem de politereftalato de etileno (PET) perfurada e não perfurada na qualidade pós-colheita de folhas de hortelã pimenta (Mentha piperita L.) armazenadas em temperatura ambiente e sob refrigeração. Os experimentos foram instalados seguindo o esquema de parcela subdividida, tendo na parcela o esquema fatorial 2x2 (dois tratamentos envolvendo hidroresfriamento e dois tratamentos envolvendo embalagens) e nas subparcelas os tempos de armazenamento no delineamento inteiramente casualizado com quatro repetições. Foi determinada a vida de prateleira, os teores de clorofila, a perda de massa fresca (PM), o teor relativo de água (TRA), os teores de açúcares solúveis totais (AST), redutores (RED), não redutores (NRED) e amido das folhas. O armazenamento refrigerado aumentou em até 64 vezes (>15 dias) a vida de prateleira de hortelã-pimenta. O hidroresfriamento aumentou o TRA das folhas. A embalagem plástica foi efetiva no aumento da vida de prateleira de hortelã-pimenta sendo eficiente na manutenção dos TRA das folhas. A embalagem não perfurada foi mais eficiente na prevenção da PM. O teor de clorofila das folhas variou de acordo com o tratamento. AST, RED, NRED e amido variaram de acordo com TRA nas folhas. O hidroresfriamento juntamente com utilização de embalagem não perfurada foi o método mais eficiente na manutenção da qualidade pós-colheita de hortelã-pimenta.


Assuntos
Mentha piperita/classificação , Embalagem de Produtos/classificação , Plantas Medicinais/classificação , Prazo de Validade de Produtos
4.
Sensors (Basel) ; 14(9): 17192-211, 2014 Sep 16.
Artigo em Inglês | MEDLINE | ID: mdl-25230305

RESUMO

A fully-integrated complementary metal-oxide semiconductor (CMOS) sensor for combined temperature and humidity measurements is presented. The main purpose of the device is to monitor the hermeticity of micro-packages for implanted integrated circuits and to ensure their safe operation by monitoring the operating temperature and humidity on-chip. The smart sensor has two modes of operation, in which either the temperature or humidity is converted into a digital code representing a frequency ratio between two oscillators. This ratio is determined by the ratios of the timing capacitances and bias currents in both oscillators. The reference oscillator is biased by a current whose temperature dependency is complementary to the proportional to absolute temperature (PTAT) current. For the temperature measurement, this results in an exceptional normalized sensitivity of about 0.77%/°C at the accepted expense of reduced linearity. The humidity sensor is a capacitor, whose value varies linearly with relative humidity (RH) with a normalized sensitivity of 0.055%/% RH. For comparison, two versions of the humidity sensor with an area of either 0.2 mm2 or 1.2 mm2 were fabricated in a commercial 0.18 µm CMOS process. The on-chip readout electronics operate from a 5 V power supply and consume a current of approximately 85 µA.


Assuntos
Umidade , Embalagem de Produtos/classificação , Semicondutores , Processamento de Sinais Assistido por Computador/instrumentação , Termografia/instrumentação , Transdutores , Água/análise , Desenho de Equipamento , Análise de Falha de Equipamento , Integração de Sistemas , Temperatura
5.
BMC Public Health ; 13: 650, 2013 Jul 13.
Artigo em Inglês | MEDLINE | ID: mdl-23849300

RESUMO

BACKGROUND: Deciding on an appropriate level for taxes on tobacco products is a critical issue in tobacco control. The aim of the present study was to describe the critical price points for packs for smokers of each pack size, to calculate what this would equate to in terms of price per stick, and to ascertain whether price points varied by age, socio-economic status and heaviness of smoking. METHODS: In November 2011, 586 Victorian smokers of factory-made cigarettes were asked during a telephone survey about their usual brand, including the size and cost of their usual pack. They were also asked about use of illicit tobacco. Smokers estimated what price their preferred pack would need to reach before they would seriously consider quitting. RESULTS: Three-quarters of regular smokers of manufactured cigarettes could envisage their usual brand reaching a price at which they would seriously consider quitting. Analyses revealed that answers clustered around whole numbers, (AUD$15, $20, $25 and $30), with a median nominated price point of AUD$20 per pack. The median price point at which regular smokers would consider quitting was calculated to be 80 cents per stick, compared to the current median reported stick price of 60 cents.Of the smokers who nominated a price point, 60.1% indicated they would seriously consider quitting if the cost of their usual brand equated to 80 cents per stick or less; 87.5% would seriously consider quitting if sticks reached one dollar each. CONCLUSIONS: These results do suggest a potentially useful approach to setting taxes in Australia. If taxes can be set high enough to ensure that the cost of the smokers' preferred packs exceeds critical price points, then it seems likely that more people would seriously attempt to quit than if the price increased to a level even slightly below the price points. Our study suggests that a tax increase large enough to ensure that a typical pack of 25 cigarettes in Australia cost at least AUD$20 would prompt more than 60% of smokers able to nominate a price point to seriously think about quitting, with particularly strong effects among low-SES smokers.


Assuntos
Comércio , Abandono do Hábito de Fumar/economia , Fumar/economia , Fumar/psicologia , Custos e Análise de Custo , Feminino , Humanos , Modelos Logísticos , Masculino , Manufaturas/economia , Razão de Chances , Embalagem de Produtos/classificação , Fatores Socioeconômicos , Impostos , Vitória
6.
Rev. bras. plantas med ; 15(1): 54-58, 2013. ilus, tab
Artigo em Português | LILACS | ID: lil-669535

RESUMO

O uso de plantas medicinais como fonte terapêutica é milenar e nos últimos anos o seu valor tem aumentado, tanto para a população quanto para a ciência. Várias empresas nacionais e internacionais empregam matéria-prima vegetal na elaboração de seus produtos, o que torna indispensável o cultivo comercial e o beneficiamento pós-colheita destas espécies. O objetivo deste trabalho foi avaliar o teor de óleo essencial de carqueja [Baccharis trimera (Less.) DC.], em três embalagens diferentes ao longo de um ano de armazenamento. Observou-se que ao longo do armazenamento, a embalagem de papel Kraft foi a que melhor preservou a integridade de certas características físicas e químicas do produto, assim como, manteve o teor de óleo ao longo de um ano de armazenamento.


The use of medicinal plants as therapeutic source is ancient and has increased in value in recent years for both the population and the science. Several national and international companies use raw plant material in the preparation of their products, making essential the commercial cultivation and the post-harvest processing of these species. The aim of this study was to evaluate the essential oil content of [Baccharis trimera (Less.) DC.] in three different packages over one year of storage. During storage, Kraft-paper package best preserved the integrity of some physical and chemical characteristics of the product and maintained the oil content for one year of storage.


Assuntos
Óleos Voláteis/provisão & distribuição , Baccharis , Embalagem de Produtos/classificação , Armazenamento de Produtos
7.
Cad Saude Publica ; 28(9): 1802-6, 2012 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-23033195

RESUMO

Aedes aegypti is the main domestic vector of the dengue virus. Control measures to prevent dengue transmission focus on the treatment and elimination of this vector's oviposition sites. There is limited biological information on Ae. aegypti in Argentina. The aim of this study was to characterize Ae. aegypti oviposition sites in the city of Puerto Iguazú, Argentina. We surveyed an area covering nine neighborhoods in 2005. We identified 191 premises as positive for Ae. aegypti, giving a general house index of 9.6%. Premises classified as residential and vacant lots presented the highest number of infested premises, with 9% and 22% respectively. The total number of surveyed containers was 29,600. The overall container index (CI) was 1.1. The most frequently infested containers were water tanks (CI = 37). These preliminary results suggest that vacant lots and water tanks provide suitable breeding areas and environmental conditions, improving the chances of Ae. aegypti survival in Puerto Iguazú.


Assuntos
Aedes/fisiologia , Dengue/epidemiologia , Reservatórios de Doenças/estatística & dados numéricos , Habitação , Insetos Vetores/fisiologia , Aedes/anatomia & histologia , Animais , Argentina/epidemiologia , Entomologia , Utensílios Domésticos/classificação , Utensílios Domésticos/estatística & dados numéricos , Humanos , Manufaturas/classificação , Manufaturas/estatística & dados numéricos , Controle de Mosquitos , Oviposição/fisiologia , Densidade Demográfica , Embalagem de Produtos/classificação , Embalagem de Produtos/estatística & dados numéricos , Estações do Ano
8.
Artigo em Inglês | MEDLINE | ID: mdl-15973959

RESUMO

Several implant components in their original glass vial and peel-back packages were subjected to sterility testing to determine whether the contents remained sterile after the expiration date marked on the package had passed. The results from a university microbiology laboratory showed that the contents remained sterile for 6 to 11 years after the expiration dates.


Assuntos
Implantes Dentários/microbiologia , Contaminação de Equipamentos , Embalagem de Produtos/normas , Vidro , Humanos , Teste de Materiais , Embalagem de Produtos/classificação , Esterilização , Fatores de Tempo
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...